Firewall Advanced Settings; General Settings; Table 30: Firewall-General Settings - Grandstream Networks GWN7000 User Manual

Schedule Start Date
Schedule End Date
Schedule Start Time
Schedule End Time
Schedule Weekdays List of
Weekdays
Schedule Days of the Month
Treat Time Values as UTC
Instead of Local Time
Firewall Action

Firewall Advanced Settings

Firewall Advanced Settings page provides the ability to setup input/output policies for each WAN interface
and LAN groups; as well as setting configuration for Static and Dynamic NAT.

General Settings

Click on next to a WAN interface or Network group to edit its input and output policies.
Refer to below table for general settings options
Input Policy
Output Policy
IP Masquerading
Click on icon to schedule a start date for this rule to be applied.
Click on icon to schedule an end date for this rule to cease effect.
Click on icon to schedule a start time for this rule to be applied.
Click on icon to schedule an end time for this rule to cease effect.
Select the days, on which the traffic rule will be applied, the unselected
days will ignore this rule.
Enter the days of the months (separated by space) on which the traffic
rule will be applied.
Example: 5 10 15
This will be applied only on 5
Check to use UTC as time zone for the specified times, instead of using
GWN7000's local time.
Select which action to perform for the given traffic rule, 3 options are
available: Accept, Reject or Drop.

Table 30: Firewall-General Settings

Select which action to apply to all incoming traffic to this interface/LAN
group, 3 actions are available: Accept, Reject and Drop.
Select which action to apply to all outgoing traffic from this interface/LAN
group, 3 actions are available: Accept, Reject and Drop.
Check to enable IP Masquerading, this will allow internal computers with
no known address outside their network, to communicate to the outside.
It allows one machine to act on behalf of other machines.
GWN7000 User Manual
th , 10 th and 15 th day monthly.
P a g e | 75