Network Groups; Figure 15: Network Group - Grandstream Networks GWN7000 User Manual

Note
If a GWN76xx is not being paired, or the pair icon is grey color, make sure that it is not being paired with
another GWN7000 Router or GWN76xx Access Point acting as Master Controller, if yes, it needs to be
unpaired first, or reset to factory default settings to make it available for pairing.

Network Groups

GWN7000 support creating up to 16 different Network groups separated by VLANs and adding paired
GWN76xx Access Points.
To access Network Groups configuration page, log in to the GWN7000 WebGUI and go to Network
Group->Network Group.
The GWN7000 will have a default network group named group0, click on
to add a new network group.
•
Radio Power: Set the Radio Power depending on desired cell
size to be broadcasted, three options are available: "Low",
"Medium" or "High". Default is "High".

Figure 15: Network Group

GWN7000 User Manual
to edit it, or click on
P a g e | 35