Table of Contents
Advertisement
Figure 70: Firewall Basic Settings
Flush Connection Reload: When this option is enabled, and a firewall configuration change is made, existing connections
that had been permitted by the previous firewall rules will be terminated. That way if the new firewall rules can't permit a
connection that had been previously established, it will be terminated and won't be able to reconnect. When this option is
disabled, existing connections are allowed to continue until they do timeout, even if the new rules wouldn't allow these
connections to be established.
Traffic Rules
GWN70xx offers the possibility to fully control incoming/outgoing traffic for different protocols in customized scheduled
times and take actions for specified rules such as Accept, Reject and Drop.
Traffic Rules settings can be accessed from GWN70xx Web GUI → Firewall → Traffic Rules.
Following actions are available to configure Input, output, and forward rules for configured protocols
○ To add new rule, Click on
.
○ To edit a rule, click on
.
○ To delete a rule, click on
.
Inbound Rules
The GWN70xx allows to filter incoming traffic to networks group or port WAN and apply rules such as:
• Accept: To allow the traffic to go through.
• Deny: A reply will be sent to the remote side stating that the packet is rejected.
• Drop: The packet will be dropped without any notice to the remote side.
Advertisement
Table of Contents
