Polycom RMX 1000 Getting Started Manual page 34

Subject
Integration with
SE 200
AES Supported
for SIP
Connection
Status of People
Audio Only
Endpoint
DTMF
LDAP
Address Book
IVR Files
FECC for SIP
FECC for iPower
Integration with
Tandberg
Endpoint
OCS
18
Description
In order to work properly with the SE 200, RMX 1000
should first be manually added to SE 200 device list.
After that the RMX 1000 can register to the SE 200.
SIP proxy must support TLS
For video switching conference, video format of an
endpoint is unknown.
Cannot create conference or activate a meeting room.
When an endpoint initially connects to the RMX 1000.
DTMF tones sent by the endpoint will be ignored for the
first 5 seconds.
Presence information for Global Address Book
participants imported via LDAP is not available.
Only a local address book can be exported. Group
associations in the address book are not exported.
The maximum size of a music file is 16MB, that of a ring
tone is 1MB, and that of other IVR files is 500KB.
If the RMX 1000 is registered with a BroadSoft SIP
server, FECC will not be supported.
FECC is not available when connecting RMX 1000 from
iPower endpoints.
PCM is available with the Tandberg Endpoint using
DTMF commands only. FECC navigation is not
supported.
Pool FQDN of OCS must be registered in DNS,
otherwise SIP calls through OCS will be abnormal.