16
TUNING THE ENGINE
16.8
Adjusting the basic position of the shift lever
–
Remove screw
401950-12
–
Clean gear teeth
–
Mount the shift lever on the shift shaft in the required position and engage the
gearing.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any other vehicle compo-
nents during the shift procedure.
–
Locate and tighten screw
401951-10
Guideline
Screw, shift lever
with washers and take off shift lever
of the shift lever and shift shaft.
with washers.
M6
.
Loctite
®
243™
14 Nm
(10.3 lbf ft)
85