Installing The Shock Absorber - Husqvarna FC 250 2017 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.19

Installing the shock absorber

–
Hold the shock absorber and remove screw
F00087-10
–
Remove the shock absorber carefully at the bottom.
F00076-10
Main work
–
Carefully position the shock absorber into the vehicle from the bottom.
–
Mount and tighten screw
Guideline
Screw, top shock
absorber
F00087-11
–
Position the swingarm and mount the swingarm pivot.
Info
Pay attention to flat area
–
Mount and tighten nut
Guideline
Nut, swingarm pivot
120324-10
–
Mount the chain.
–
Connect the chain with connecting link
Guideline
The closed side of the chain joint lock must face in the direction of travel.
120325-10
–
Position the foot brake cylinder.
Push rod
Info
Ensure that the dust boot is correctly seated.
–
Mount and tighten screws
Guideline
Remaining screws, chassis
F00077-10

.
M10

.

.


engages in the foot brake cylinder.
 .

.
Loctite
60 Nm
(44.3 lbf ft)
M16x1.5 100 Nm
(73.8 lbf ft)
.
M6 10 Nm (7.4 lbf ft)
44
2701™
®