Closing The Filler Cap; Cold Start Button - Husqvarna FC 250 2017 Owner's Manual

6 CONTROLS
6.9

Closing the filler cap

6.10

Cold start button

–
Turn filler cap
F00044-10
–
Mount filler cap
Info
Run the fuel tank breather hose
F00044-11
Cold start button
The injection system extends the injection time if the engine is cold and the outside
temperature is low. To help the engine burn the increased amount of fuel, it must be
supplied with additional oxygen by pushing the cold start button.
After briefly opening up the throttle and then releasing the throttle grip again, or turn-
ing the throttle grip towards the front, the cold start button returns to its original posi-
tion.
Info
Check whether the cold start button has returned to its basic position.
Possible states
The cold start button is activated – The cold start button is pushed in all the way.
•
The cold start button is deactivated – The cold start button is in its basic posi-
•
tion.
F00045-10

counterclockwise and lift it off.

and turn it clockwise until the fuel tank is tightly closed.


is fitted on the bottom of the throttle valve body.
without kinks.
13