Checking The Front Brake Linings; Changing The Front Brake Linings - Husqvarna FC 250 2017 Owner's Manual

12 BRAKE SYSTEM
Info
Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and brake lines are not designed for DOT 5
brake fluid.
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint.
Only use clean brake fluid from a sealed container.
12.6

Checking the front brake linings

Warning
Danger of accidents Worn-out brake linings reduce the braking effect.
–
Ensure that worn-out brake linings are replaced immediately. (Your authorized Husqvarna Motorcycles workshop will be
glad to help.)
12.7

Changing the front brake linings

Warning
Danger of accidents Incorrect maintenance will cause the brake system to fail.
–
Ensure that service work and repairs are performed professionally. (Your authorized Husqvarna Motorcycles workshop
will be glad to help.)
Preparatory work
–
Check the front brake linings. (
Main work
–
Move the brake fluid reservoir mounted on the handlebar to a horizontal position.
–
Remove screws
–
Remove cover
–
Add brake fluid to level
Guideline
Level 
reservoir rim)
Brake fluid DOT 4 (
–
Position the cover with the membrane. Mount and tighten the screws.
Info
Clean up overflowed or spilled brake fluid immediately with water.
F00061-10
–
Check the brake linings for minimum thickness
Minimum thickness
» If the minimum thickness is less than specified:
–
Change the front brake linings.
–
Check the brake linings for damage and cracking.
» If damage or cracking is visible:
–
Change the front brake linings.
F00062-10
p. 62)

.
 
with membrane

.
(brake fluid level below
p. 102)

.
5 mm (0.2 in)

.
≥ 1 mm (≥ 0.04 in)
( p. 62)
( p. 62)
62