11
SERVICE WORK ON THE CHASSIS
11.16
Removing the front fender
11.17
Installing the front fender
11.18
Removing the shock absorber
Preparatory work
–
Remove the start number plate. (
Main work
–
Remove screws
H00271-10
Main work
–
Position the front fender. Mount and tighten screws
Guideline
Remaining screws, chassis
H00271-10
Finishing work
–
Install the start number plate. (
Preparatory work
–
Raise the motorcycle with a lift stand. (
p. 41)
and
. Remove the front fender.
M6
p. 41)
p. 35)
and
.
10 Nm (7.4 lbf ft)
42