Adjusting The Compression Damping Of The Fork; Adjusting The Rebound Damping Of The Fork - Husqvarna FC 250 2017 Owner's Manual

10 TUNING THE CHASSIS
10.14

Adjusting the compression damping of the fork

Info
The hydraulic compression damping determines the fork suspension behavior.
10.15

Adjusting the rebound damping of the fork

Info
The hydraulic rebound damping determines the fork suspension behavior.
–
Disconnect the fork pump from the left fork leg.
When disconnecting, excess pressure will escape from the hose – the fork
leg itself does not lose any air.
The fork pump indicator switches off automatically after 80 seconds.
–
Mount the protection cap.
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Turn adjusting screw
Info
Adjusting screw
–
Turn counterclockwise by the number of clicks corresponding to the fork type.
Guideline
Compression damping
Comfort
K00476-10
Standard
Sport
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.
–
Remove protection cap
–
Turn adjusting screw
Info
The adjusting screw
–
Turn counterclockwise by the number of clicks corresponding to the fork type.
Guideline
Rebound damping
M01100-10
Comfort
Standard
Sport
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.
–
Mount protection cap
p. 35)

clockwise all the way.

is located at the upper end of the right fork leg.
20 clicks
17 clicks
12 clicks

.

clockwise all the way.

is located at the lower end of the right fork leg.
20 clicks
17 clicks
12 clicks

.
33