Removing The Main Silencer; Installing The Main Silencer - Husqvarna FC 250 2017 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.27

Removing the main silencer

Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
11.28

Installing the main silencer

Preparatory work
–
Remove the air filter box cover. (
–
Remove the air filter.
Main work
–
Wash the air filter thoroughly in special cleaning liquid and allow it to dry properly.
Air filter cleaning agent (
Info
Only press the air filter to dry it, never wring it out.
–
Oil the dry air filter with a high quality filter oil.
Oil for foam air filter (
H01407-10
–
Clean the air filter box.
–
Check the intake flange for damage and looseness.
Finishing work
–
Install the air filter.
–
Install the air filter box cover. (
Preparatory work
–
Remove the right side cover. (
Main work
–
Disconnect spring
Spring hook (50305017000)
–
Remove screws
H01408-10
Main work
–
Mount the main silencer. Mount screws
–
Attach spring
Spring hook (50305017000)
–
Tighten screws
Guideline
Remaining screws, chassis
H01408-11
Finishing work
–
Install the right side cover. (
p. 46)
( p. 47)
p. 104)
p. 104)
( p. 47)
p. 46)
p. 49)
 .

and take off the main silencer.


.

.
p. 50)
, but do not tighten yet.
M6 10 Nm (7.4 lbf ft)
48