Refilling With Coolant - Husqvarna FC 250 2017 Owner's Manual

15 COOLING SYSTEM
15.5

Refilling with coolant

Warning
Danger of poisoning Coolant is toxic and a health hazard.
–
Keep coolant out of the reach of children.
–
Do not allow coolant to come into contact with the skin, the eyes and clothing.
–
Consult a doctor immediately if coolant is swallowed.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
–
Change clothing if coolant spills onto your clothing.
–
Position the motorcycle upright.
–
Place a suitable container under the water pump cover.
–
Remove screw
–
Completely drain the coolant.
–
Mount and tighten screw
Guideline
Screw, water pump cover
F00072-10
–
Make sure that screw
–
Position the motorcycle upright.
–
Pour coolant in up to measurement
Guideline
Distance
Coolant (
–
Mount the radiator cap.
120353-10
–
Go for a short test ride.
–
Check the coolant level. (

. Take off radiator cap

with a new seal ring.

is tightened.


above the radiator fins
p. 102)
p. 79)

.
M6 10 Nm (7.4 lbf ft)
above the radiator fins.
10 mm (0.39 in)
80