Sharp MX-M905 User Manual page 834

SYSTEM SETTINGS►SYSTEM SETTINGS
Settings to Disable Transmission
These settings are used to disable the following transmission operations.
Disable [Resend] on Fax/Image Send Mode
This setting disables the [Resend] key in the base screen of image send mode.
Disable Selection from Address Book
Disables the selection of destinations from the address book.
Configure the setting for each of the following items:
• E-Mail
• FTP
• Desktop
• Network Folder
• Internet Fax (Including Direct SMTP)
• Fax
Select All: Selects all items.
Clear Checked: Clears all selections.
Disable Direct Entry
Disables the direct entry of destination address and others.
Configure the setting for each of the following items:
• E-Mail
• Network Folder
• Internet Fax (Including Direct SMTP)
• Fax
Select All: Selects all items.
Clear Checked: Clears all selections.
Disabling of PC Scan
This prohibits PC Scan transmission.
Disable Storing to External Memory Device
Disables to store to the external memory device.
Disable PC-I-Fax Transmission
This prohibits PC-I-Fax transmission.
Disable PC-Fax Transmission
This prohibits PC-Fax transmission.
Disabling of Find My Address
This prohibits Find My Address.
Own Name and Destination Set
Stores the Internet-Fax or Fax sender information.
Sender Data Registration
Use this to store the sender name for fax and Internet fax, the sender fax number, and the sender address for Internet fax. The
stored sender name and sender fax number or Internet sender address will be printed at the top of the received fax.
Sender Name
Enter the sender name. A maximum of 20 characters can be entered for the sender name.
Sender Fax Number
Sets the sender fax number.
To insert a pause between digits of the number, tap the [-] key.
To insert a space between digits of the number, tap the [Space] key.
I-Fax Own Address
Enter a default sender address (maximum of 56 characters).
8-99