Table of Contents
Advertisement
FACSIMILE►OTHERS FUNCTION
3
Address Book
Address
Fax Number
Exposure
Auto
Resolution
Super Fine
Original
Job Build
Slow Scan Mode
Mixed Size Orig.
Original Count
Others
To cancel the job build setting
Tap the [Job Build] key to uncheck it.
Change settings as needed.
4
Tap the [Start] key to scan the first original page.
5
Place the next set of originals and tap the [Start] key.
6
Repeat this step until all originals have been scanned.
• If needed, tap [Change Setting] before tapping the [Start] key, and change the original scan settings and send settings
for the next original. The setting changes will be applied to the next job.
• If you tap the [Preview] key, you cannot scan additional pages.
To cancel scanning:
Tap the [CA] key. All settings including scanned data will be cleared.
Tap the [Read-End] key.
7
If no action is taken for one minute after the confirmation screen appears, scanning automatically ends and the
transmission is reserved.
To change the time until transmission takes place automatically:
Select "Settings (administrator)" - [System Settings] → [Image Send Settings] → [Common Settings]
→ [Condition Settings] → [Job Auto Start Time During Scanning].
Sending History
Call Search Number
Direct TX
Verification Stamp
Call Program
Call Registered settings
Send Same Image
as Fax Address
Preview
Scan Size
Send Size
100%
Auto
Auto
8½x11
8½x11
Speaker
reception memory
100%
Tap the [Job Build] key.
A checkmark appears on the icon.
CA
Start
4-77
Advertisement
Chapters
Table of Contents
