Sharp MX-M905 User Manual page 817

SYSTEM SETTINGS►USER CONTROL
Search for a sub code
Enter the sub code and sub code name, then tap the [Search] key; the search result is displayed.
Settings
Item
Sub Code
Sub Code Name
Available to
To register a group for specifying a public destination
In "Settings (administrator)", select [User Control] → [Organization /Group List].
Card Setting
Card Area Setting
The data check during card reading can be set.
Settings
Item
Check System Code only in
FeliCa User Area mode
Check Facility Code in HID mode
Facility Code
Importing from the setup file
Card Type / Card Reader Settings
Use these settings for authentication and for use of a HID or other IC card.
Settings
Item
Card Type / Card Reader
Card Reader Device Registration
Add a card reader.
Enter the sub code. Specify the code using up to 32 single-byte characters.
Enter the sub code. Specify the code name using up to 32 double- or single-byte
characters.
The registered billing codes can only be shared in the specified group.
When not specifying a public destination, select [All Users].
When specifying a public destination, select [Designate Public Address.], then specify a
group to share the billing code.
Check the System Code only in FeliCa User Area mode.
Checks the facility code of a HID card.
Enters the facility code of a HID card. When you tap the [Store] key, the facility code is
stored.
When you enter the configuration file name and tap the [Execute] key, the card area
settings are read from the configuration file. If you tap the [Clear] key, all files that match the
current search conditions are deleted.
Enter the card type and card reader information.
8-82
Description
Description
Description