Sharp MX-M905 User Manual page 892

Digital multifunction system

Hide thumbs Also See for MX-M905:

Table of Contents

SYSTEM SETTINGS►SYSTEM SETTINGS

Security Settings

When settings are changed, the changes will take effect after the machine is restarted. To restart the machine, see

"TURNING ON THE POWER (page

Password Change

Restrict Device Web Page Access Via Password

Use this setting to display the login screen and require login in order to access the Web server.

Change Password

The administrator password can be changed.

When changing the password, be sure to remember the new password.

(It is recommended that you periodically change the administrator password.)

Enter a password consisting of 5 to 32 characters, and tap the [Store] key.

Your setting is made valid only when the machine is turned On again.

• The user-level authentication password is required to add, edit or delete the destination. When you log on, enter

"users" as the user name. Then, enter the user password that you have registered with this option.

The administrator-level authentication password is required to select all settings and the same functions as those

available with the user-level password. When you log on, enter "admin" as the user name. Then, enter the

administrator password that you have registered with this option.

• If you tap the [Store] key without entering a password, the previously set value is assumed. Password protection is

enabled by default.

In the factory default state, the user password must be entered.

(For the default password, see "Start Guide".)

Port Control

Enable or disable main system ports, set the port numbers, and tap the [Store] key.

The following ports can be configured.

• Tandem Output Receive

• Remote Operation Panel

• Print Release

• Sharp OSA (Expansion Platform)

• Notify Job End

• Tandem Output Send

• Data Backup (Send)

• Print Release

Chapters

Table of Contents