Sharp MX-M905 User Manual page 730

MANUAL FINISHING►OPERATION OF MANUAL FINISHING
If you select [All Pages] for the number of copies/number of pages, specify "1" for the number of sets to be printed.
If you set more copies or pages than the number of copies or pages that can be stapled, a message is displayed and the
[Start] key is disabled.
See "Specifications" in the "Start Guide" and specify the number of copies or pages that can be stapled.
TRIMMER SETTING
If a trimmer unit is installed, you can trim off excess edges of paper for a finer finish.
Trimmer Setting (when Saddle Stitch is selected)
To select the Trimmer Setting, a trimmer unit must be installed.
1
Output Tray
Upper Tray
Middle Tray
Lower Tray
Staple
Off
1 Staple
at Back
1 Staple
Saddle
at Front
Stitch
Trimmer
2 Staples
Setting
2
Output Tray
Upper Tray
Middle Tray
Trimmer Setting
Set Trimming Width.
Lower Tray
Off
Staple
On
Off
1 Staple
at Back
1 Staple Saddle
at Front
Stitch
Trimmer
2 Staples
Setting
To cancel the trimmer setting:
Tap the [Off] key.
Inserter
Plain 1
Upper Tray
8½x11
Plain 1
Lower Tray
8½x11
Type and Size
Punch Fold
Accord-
Off Off Copies/Pages
ion Fold
2 Hole Saddle Double
Punch Fold Fold
Half Fold Z-Fold
C-Fold Detail
Inserter
Plain 1
Upper Tray
8½x11
Plain 1
Lower Tray
8½x11
Type and Size
Punch Fold
( 2.0~20.0 ) Accord-
Off Copies/Pages
2 Off 0
mm
ion Fold
Saddle Double
2-Hole Punch
Fold Fold
Half Fold Z-Fold
C-Fold Detail
With Saddle Stitch selected, tap the
[Trimmer Setting] key.
CA
Start
Tap the [On] key, and specify the
trimming width.
Tap the numeric value display field of the trimming width,
and enter the allowable range using the numeric keys.
Otherwise, tap the
After the settings are completed, tap
CA
Start
7-13
key to enter the values.
.