Sharp MX-M905 User Manual page 639

SCANNER/INTERNET FAX►OTHER FUNCTIONS
Place originals in the automatic document feeder.
1
► AUTOMATIC DOCUMENT FEEDER (page 1-89)
Tap the mode display to switch to the initial screen of each mode.
2
► Changing mode from each mode (page 5-10)
Specify the destination.
3
► RETRIEVING A DESTINATION FROM AN ADDRESS BOOK (page 5-16)
► VIEWING A LIST OF THE SELECTED DESTINATIONS (page 5-19)
► USING A SEARCH NUMBER TO RETRIEVE A DESTINATION (page 5-20)
► ENTERING AN ADDRESS MANUALLY (page 5-21)
► SPECIFYING A NETWORK FOLDER (page 5-22)
► RETRIEVING A DESTINATION FROM A GLOBAL ADDRESS BOOK (page 5-23)
► USING A TRANSMISSION LOG TO RESEND (page 5-25)
Tap [Verification Stamp] on the action panel or [Others] key, and tap the
4
[Verif. Stamp] key.
The appropriate icon or checkbox is selected.
If you tap the [Others] key, tap the [Back] key after the settings have been completed.
To cancel the verification stamp setting:
Tap [Verification Stamp] on the action panel or the [Others] key, and tap [Verif. Stamp] to clear the checkmark.
Tap the [Start] key to start scanning of the original.
5
A beep will sound to indicate that scanning and transmission have ended.
Tap the [Preview] key to check the preview of an image before sending a fax. For more information, see
THE IMAGE TO BE TRANSMITTED (page
screen.
5-64)". However, settings for this function cannot be changed in the preview
5-107
"CHECKING