Table of Contents
Advertisement
Using NetView to Clear NVRAM
•
Connect your receiver and computer. Start
NetView. Establish connection between NetView
and receiver.
•
Click on the receiver name on the left panel. On
the right click on Actions4Clear NVRAM.
•
Confirm NVRAM clearing.
Checking Firmware Version
Use NetView to check the firmware version of your
receiver.
•
Connect your receiver and computer. Start
NetView. Establish connection between NetView
and receiver.
•
Click on the receiver name on the left panel. On
the right appears the information about receiver
including receiver model, ID, firmware version.
To save this information to the .txt file, click
Reports4Receiver info on the right panel.
Loading New Firmware
Base and Rover receivers must be loaded with the
same firmware version. Use the latest firmware version,
available for download from the JAVAD GNSS web-
site, to ensure your receiver has the most recent updates.
To load new firmware use NetView.
•
Connect your receiver and computer. Start
NetView. Establish connection between NetView
and receiver.
•
Click on the receiver name on the left panel. On
the right appears the information about receiver.
•
Click Action4Update firmware.
•
Select the file with the mew firmware and click
Open.
www.javad.com
17
Advertisement
Table of Contents
Need help?
Do you have a question about the DELTA-3N and is the answer not in the manual?