Other Settings - Siemens simatic hmi op27 Equipment Manual

11.3

Other Settings

Date/Time
The current date and time can be set on the OP in order, for example, to make
adjustments for summer and winter time. Any changes affect all the fields
which display a date and time variable. The display format for date and time is
set in the configuration and cannot be changed later on the OP.
After setting the time, do not switch the OP off for at least 30 seconds. During
this time the OP saves the date and time in the non–volatile memory.
Language
The configuration can be loaded onto the OP in up to three languages simulta-
neously. It is possible to switch to any of the languages at any time in Online
mode. After switching to another language, all passages of language-dependent
text are displayed in the new language.
The OP saves the current language setting in the non-volatile memory. The
next time the OP is switched on, all the language-dependent texts are displayed
in the last language set.
OP27, OP37 Equipment Manual
Release 05/99
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Step
1 Position the cursor on the System Settings standard screen at the Date or
Time numeric input field .
2 Enter the current values. Enter the dots as well. Note the conventions for
date and time since the old value must be deleted before the new one can
be entered.
3 Confirm the entry by pressing:
4 or cancel the action by pressing:
Step
1 Press the button assigned to the icon shown on the right on the
System Settings standard screen.
2 The language is changed cyclically every time the key is pressed.
System Settings
Action
Action
ENTER
ESC
I USA
D
E
F GBR
11-5