Connection And Adjusting Elements - Siemens simatic hmi op27 Equipment Manual

18.2.2

Connection and Adjusting Elements

Each module has
S
S
When installed, the plug connector and the DIL switch are located on the rear
panel of the OP.
Figure 18-7 Location of connection and adjustment elements on large module housing
OP27, OP37 Equipment Manual
Release 05/99
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
a 10-pin plug connector
for connecting the outputs and the external power supply
a DIL switch
for defining whether the outputs are determined by the stroke of a key or by
software.
DIL switch
DKM B
(example OP37)
Pins
DKM A
Options
18-7