System Messages - Siemens simatic hmi op27 Equipment Manual

System Messages

Message number
OP system messages can be subdivided into various categories.
The information as to which category a system message belongs to is contained
in the message number as indicated below.
The message category enables you to identify the general area in which the
cause of the fault is to be found.
Below you will find a selection of system messages listed together with details
of under what circumstances they occur and, where applicable, how the cause
of the fault can be eliminated.
Self-explanatory system messages are not included.
OP27, OP37 Equipment Manual
Release 05/99
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Message number
VVV
Message text
0 Driver error
1 Startup message
2 Warning
3 Information message
4 Operator error
5 Other message
6 Configuration error
7 Internal error
Note
System messages are displayed in the language selected in the configuration.
If the OP does not have access to any configuration data, the messages are
displayed in English.
D
D-1