Siemens simatic hmi op27 Equipment Manual page 101

Storing and Loading Data
Inserting memory Use Slot A for inserting the memory card on the OP27, and Slot B on the OP37
card (refer to Chapters 16.3 and 17.3).
A backup Flash ! Module can be carried out in normal operation of the OP:
Backup
flash ³ module
Restore If a memory card only contains recipe data records, they can be transferred
module ³ flash
back in normal operation of the OP:
9-6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Step
1 Insert the memory card in Slot A of the OP27 or Slot B of the OP37.
2 Delete or initialize the memory card prior to backup.
3 Press the function key, depicted on the right, in the Backup/Re-
store standard screen, thus initiating the Backup function. A
message is issued on the OP following successful transfer.
4 Remove the memory card from the OP.
Step
1 Insert the memory card in Slot A of the OP27 or Slot B of the OP37.
2 Press the function key, depicted on the right, in the Backup/Re-
store standard screen, thus initiating the Backup function.
The recipe data records in the internal flash memory are over-
written by the data records stored on the memory card.
3 Remove the memory card from the OP.
Note
Recipe data records stored on the memory card with the backup function must
be restored to the internal flash memory on the OP before they can be edited.
Recipe data records created directly on the memory card (e.g. by using the
standard screens Data Record Processing and Transmission and Selective
Data Record Transmission), cannot be transferred back to the internal flash
memory by means of the restore function.
Action
Action
OP27, OP37 Equipment Manual
Release 05/99