Siemens simatic hmi op27 Equipment Manual page 4

Preface
Purpose
This equipment manual provides operation, installation, configuration and sys-
tem personnel with information concerning functionality, operation and techni-
cal design of the Operator Panels OP27 and OP37.
Organization of the The "OP27 , OP37 Operator Panel" equipment manual is organized into the
manual
following chapters:
Conventions The following conventions are used throughout this manual:
OP27, OP37 Equipment Manual
Release 05/99
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Part Chapters
I 1 - 2 Overview of features and functional scope of the
OP in tabular form.
II 3 - 11 Step-by–step instructions on how to operate the OP
using the standard screens.
III 12 - 15 – Mechanical and electrical installation,
– Commissioning
– OP37 in DOS Mode
IV 16 - 19 Detailed information on the OP and its
maintenance.
V Appendix – Technical data,
A – F
– Interface assignments,
– Hardware test,
– System messages,
– SIMATIC HMI documentation,
– ESD guidelines,
– Glossary of terms
Motor off Text which appears in the OP display is presented in
this typewriter font.
Variable Symbolic names representing variable values on the
screen are presented in this italic typewriter font
Screens Functions selected by the user are presented in this
standard italic font.
The labels of buttons are presented in a different
ESC
font.
Contents
i