Labeling Function Keys - Siemens simatic hmi op27 Equipment Manual

OP37 Unit Description
17.5

Labeling Function Keys

Labeling OP37
The function keys on the operator panel are labeled ex works as follows:
Function Keys
S
S
A set of unlabeled strips is enclosed with the OP. This means that keys on the
OP can be labeled according to individual systems.
Replacing labeling Proceed as follows to replace the labeling strips:
strips
1. Set the unit down with its front plate facing downwards.
!
2. Remove the screws indicated in Figure 17-3 as
Figure 17-3 Undo screws
3. Remove the covers.
4. Extract the labeling strips to be replaced.
5. Insert the new strips
17-6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
F1 to F20 and
K1 to K16.
Caution
Make sure that the OP is disconnected from the power supply.
1
1
2
on the front plate (see Figure 17-4).
1 .
1
1
1
with the inscription facing downwards into the slits
OP27, OP37 Equipment Manual
1
Release 05/99