❷ Use; I Operati Ng Principle; I User Interface Presentati On - Zodiac ZS500 Instructions For Installation And Use Manual

❷ Use

2.1 I Operati ng principle

Your heat pump uses the calories (heat) in the air to heat up your pool's water. The process to heat your pool's water to
the temperature you want may take a few days as it depends on the weather conditi ons, your heat pump's power and
the diff erence between the water temperature and the temperature you want.
The heat pump is ideal for maintaining temperature.
The warmer and damper the air, the bett er your heat pump will perform. The outoor parameters for opti mum operati on
are an air temperature of 27°C, a water temperature of 27°C and 80% hygrometry.
Tip: improve your pool's temperature rise and maintenance
• Anti cipate the commissioning of your pool far enough in advance before you use it.
• For the temperature rise, set the water circulati on conti nuous (24/24) in "Boost" mode.
• To maintain the temperature throughout the season, run "automati c" circulati on for at least 12 hours/
day (the longer this ti me the longer the appliance will have enough operati ng range to heat up) in "Smart"
or "Eco Silence" mode.
• Cover the basin with a sheet (bubble canopy, canvas, etc.) to prevent heat loss.
• Take advantage of a period with mild outdoor temperatures (on average > 10°C at night); it will be even
more eff ecti ve if it runs during the warmest hours of the day.
• Keep the evaporator clean.
• Set the temperature you want and let the heat pump run.
• Connect the "Heati ng priority"; the fi ltrati on pump and heat pump operati ng ti me will be set according
to requirements.

2.2 I User interface presentati on

"Power" light
"Alert" light
Screen type
Splash screen
(4 seconds)
Home screen
H0430700.E - EN - 2016-01
"On/off butt on" (press and hold for 3 seconds)
Menu access selecti on butt on
Back/exit butt on
Value setti ng butt on
Fixed = device powered up
Flashing = alert message on the screen or operati ng fault
Display Content
Model
Electronic board soft ware versions
A1 = regulati on board
A2 = display board
(No. given for informati on purposes)
Date
Operati ng mode
Temperature set point
Water intake temperature
Heat pump status
EN
7