I Hydraulic Connecti Ons - Zodiac ZS500 Instructions For Installation And Use Manual

1.2 I Hydraulic connecti ons

• The device will be connected with a Ø50 PVC pipe, using the half union connectors supplied (see § "5.1 I Descripti on"),
to the pool's fi ltrati on circuit, aft er the fi lter and before the water treatment.
• Respect the directi on of hydraulic connecti on.
• A by-pass must be installed to make it easier to work on the device.
Connecti on to a standard fi ltrati on circuit
• To evacuate the condensati on, fi t a Ø18 pipe inside the grooved elbow to be mounted under the device's base.
Condensati on drainage orientati on
Tip: condensati on drainage
Cauti on, several litres of water must be drained from your device each day. We strongly recommend
connecti ng the drainage to the sewers
We also recommend ti lti ng the device slightly backwards (using the adjustable studs) for bett er condensati on
drainage.
4
: water entry valve
: by-pass valve
: water exit valve
: water entry adjustment valve
(opti onal)
: water exit adjustment valve
(opti onal)
: water treatment
* minimum distance
H0430700.E - EN - 2016-01