I Presentati On Of The Menu - Zodiac ZS500 Instructions For Installation And Use Manual

2.5 I Presentati on of the menu

To access the menu, press
To browse the menus and modify the values, press
To validate a selecti on, press
To go back in the menus, press
Opti onal
Tip: programme your ti me windows properly
If you want to program the device over the 24 hours of a day, start the fi rst ti me slot at 00:00 and end the
last at 24:00.
The heat pump will not work in ti me windows that are not entered.
10
.
or
.
Select the language for the interface
Set the current day and ti me
Select the
device's
operati ng mode
Displays the water fl ow present
Set the rate using valve E (or C if no valve E). In this setti ng phase, wait a few
minutes aft er each valve positi on change for the device to balance out.
Adjust the screen contrast
For faster heati ng
For opti mised operati on
For economic and silent operati on
Defi ne the ti me ranges and operati ng
modes (by daily or weekly range)
Water cooling functi on acti vated
or
H0430700.E - EN - 2016-01