I Hydraulic Connections - Zodiac Power Force 25 Instructions For Installation And Use Manual

1.2 I Hydraulic connections

• The device will be connected with a Ø63 PVC pipe, using the half union connectors supplied, to the pool's filtration
circuit, after the filter and before the water treatment.
• Respect the direction of hydraulic connection.
• A by-pass must be installed to make it easier to work on the device.
• Adjust the water flow with valve A and leave valves B, C, D and E open.
Connection to a standard filtration circuit
Tip: condensation drainage
Caution, several litres of water must be drained from your device each day. We strongly recommend
connecting the drainage to the sewers
6
: water entry valve
: by-pass valve
: water exit valve
: water entry adjustment valve
(optional)
: water exit adjustment valve
(optional)
* minimum distance