I Presentation Of The Menu - Zodiac Heat Select ZS500 Series Instructions For Installation And Use Manual

2.5 I Presentation of the menu

To access the menu, press
To browse the menus and modify the values, press
To validate a selection, press
To go back in the menus, press
Optional
Tip: programme your time windows properly
If you want to program the device over the 24 hours of a day, start the first time slot at 00:00 and end the
last at 24:00.
The heat pump will not work in time windows that are not entered.
.
or
.
Select the language for the interface
Set the current day and time
Select the
device's
operating mode
Displays the water flow present
Set the rate using valve E (or C if no valve E). In this setting phase, wait a few
minutes after each valve position change for the device to balance out.
Adjust the screen contrast
For faster heating
For optimised operation
For economic and silent operation
Define the time ranges and operating
modes (by daily or weekly range)
Water cooling function activated
or
EN
10