Starting The Treadmill Desk - LifeSpan DT5 Owner's Manual

Treadmill/bike desk
Hide thumbs Also See for DT5:
Table of Contents

Advertisement

Starting the Treadmill Desk

1.
Turn the On/Off toggle switch located on the front right corner of the
treadmill to the on position. If this is already On, press the On/Off key to
turn on the console.
2.
Make sure the safety key is engaged in the console.
NOTE: The display will show "–––" if the safety key is not engaged.
Please make sure that the Safety Key is fully engaged. It is possible
the display will not show "–––" when just partially engaged.
3.
Press the Start button to start the treadmill belt. The console will start
counting up from 0:00.
4.
Press the Up/Down buttons to adjust speed, or use the Preset key to go
directly to your preferred speed (which defaults to 1.5 mph). See the
separate section on Preset, as well as the section on Settings, for more
details.
30
Desk Height
Preset
1
2
Desk Height
Preset
1
2
Power
Desk Height
Preset
1
2
DT7 only
Power
Console Buttons
1.
On/Off: Turns on the console. When pressed again, turns off the console;
the console must be in standby mode (displaying the current time) for
the power off function to work.
2.
Start: Starts the treadmill belt. Performs other functions in Settings.
Stop: Stops the treadmill belt, Pausing your use. If pressed for one second,
3.
resets the console (all data readouts are reset to zero).
4.
Preset: When the treadmill belt is moving, changes the speed to 1.5
mph, or to a custom speed that is set in Settings. See separate section on
Preset, as well as the section on Settings.
5.
: Increases or decreases speed by 0.1 mph.
Change Display: Changes the data readout between Time (the default),
6.
Distance, Steps, Calories, and Speed. Press and hold for one second to
automatically change readouts every five seconds; press again to stop
this automatic change.
7.
Bluetooth: Turns on Bluetooth communications. Phone apps available
from LifeSpan can use this system to track your activity. See the Bluetooth
section for more details. You can change the function of this key in
Settings.
Treadmill Desk Console Overview
Bluetooth
Change
Bluetooth
Display
Speed
Start
Stop
Preset
Reset
Bluetooth
Change
Bluetooth
Display
Speed
Start
Stop
Preset
Reset
DT7 and DT5
Power
S
31

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dt7

Table of Contents