Starting The Treadmill Desk - LifeSpan TR800-DT5 Owner's Manual

Treadmill Desk Operations

Starting the Treadmill Desk

1. Turn the On/Off toggle switch located on the front right corner of the
treadmill to the On position. If this is already On, press the On/Off button
on the console.
2. Make sure the Safety Key is engaged in the console.
NOTE: The display will show "–––" if the Safety Key is not engaged.
Please make sure that the Safety Key is fully engaged. It is possible
the display will not show "–––" when just partially engaged.
3. Press the Start button to start the treadmill belt. The console will start
counting up from 0:00.
4. Press the Up/Down buttons to adjust speed, or use the Preset button to
go directly to your preferred speed (which defaults to 1.5 mph). See the
separate section on Preset, as well as the section on Settings, for more
details.
42