Dt7 Electric Treadmill Desk Assembly; Treadmill Desk Operations - LifeSpan DT5 Owner's Manual

DT7 Electric Treadmill Desk:
Assembly Instructions
Treadmill to DT7 Desk Assembly
A. Position the pre-assembled treadmill as shown below.
B. Lift the rear of the treadmill and roll it forward under the desk until the
Treadmill Positioning Bumper (D) located on the treadmill are centered
over the Desktop Positioning Bumper (A) at the base of the uprights.
Roll Forward
Lift
D
C. Plug the Console
Electronics Cable into the
desk D-Connector and
treadmill Console Port and
tighten the thumb screws.
D. Plug the Power Cord into
the desk Power Receptacle
and into a wall outlet.
Console
E. Plug the Power Cord
Connector
into the treadmill Power
Receptacle and wall outlet.
NOTE: Be sure all
connectors are plugged
in prior to connecting the
power cord
F. Turn the treadmill Power
Switch on.
26
D
A
Treadmill Connections
Power Switch
Power Receptacle
Console Port
D-Connector
Desk Power Receptacle
Desk Connections
Treadmill Desk
Operations
27