Starting The Treadmill Desk - LifeSpan DT3 Owner's Manual

Starting the Treadmill Desk

1. Turn the power switch on. It is located on the front right corner of the
treadmill.
2. The current user weight will be flashing on the display panel. Adjust your
weight to obtain accurate calorie calculations.
3. Make sure the safety key is engaged in the console.
NOTE: The display will show "–––" if the Safety Key is not engaged.
4. Press the Start button to start the treadmill belt. The console will start
counting up from 0:00.
5. Press the
to your preferred speed (which defaults to 1.5 mph). See the separate
section on Preset, as well as the section on Settings, for more details.
The steps are counted normally from 1 to 9,999 steps. After 9,999
steps, the display format changes to accommodate more than four
digits. Take the number shown in the display and add a zero to the
Below are examples of what the display will read and what those
1001 = 10,010 steps
Treadmill Desk Innovative Features
Intelli-Step TM – LifeSpan treadmill desks come with Intelli-Step our exclusive
step counting feature that senses each time your foot lands on the walking
belt and counts your step total on the display console. If you're in the habit of
counting daily steps or want to incorporate a daily or weekly step count goal
this feature will provide more accurate step counting than using a smartwatch
or other wearable step counting device on your wrist. Accuracy does require
that the treadmill desk is able to detect your steps and will be less accurate
for those who walk lightly including those individuals under a 100 pounds
(45.5 KG).
buttons to adjust speed, or use the Preset key to go directly
right for the correct number of steps.
numbers mean:
1005 = 10,050 steps
Treadmill Desk Console Overview
NOTE:
1100 = 11,000 steps
23