LifeSpan DT3 Quick Start

FITNESS
Begin Here
1. Position the treadmill
under your desk
Stand on the belt to see if you are
close enough to the desk to work
and walk. Adjust as needed.
3
2
4
2. Attach the Console Cable
After connecting the console cable
to the treadmill place the console on
the desktop.
3. Attach the Power Cord
Connect the power cord to the base
of the treadmill then to a power
outlet.
4. Turn the Power Switch on
QUICK START
DT3 TREADMILL
8
5. Confirm that the Safety Key is securely in place
6. Press and hold the Stop button for 1-3 seconds to
reset the console
7. Press Enter
Stand on the siderails of treadmill.
8. Press Start
The treadmill belt will start to move. You can begin walking.
9. Adjust speed with the up and down arrow buttons
10. Press Stop when you are finished
6 10
7
5
lifespanfitness.com
9