LifeSpan DT5 Owner's Manual page 23

Bike Desk Troubleshooting
This bike desk has been designed and manufactured to be reliable and easy
to use. However, if you have a problem, these troubleshooting steps may help
you find the cause.
Problem: The console is erratic or not lighting up.
Solution: Check to make sure the bike is properly plugged in. Make sure the
connectors on the bike and under the desktop are fully plugged in. If the
problem persists contact LifeSpan customer service.
Problem: "UART" appears in the display.
Solution: Turn the bike desk power switch off. Unplug and re-plug the
connections made in Step C on page 25 (DT5) on page 26 (DT7). Make sure
the thumb screws are properly tightened. Unplug the bike and plug it back in
and check to see if it functions properly.
Problem: "dc-6" appears in the display.
Solution: Turn the bike desk power switch off. Unplug and re-plug the
connections made in Step C on page 25 (DT5) on page 26 (DT7). Make sure
the thumb screws are properly tightened. Unplug the bike and plug it back in
and check to see if it functions properly.
Problem: The console isn't connecting to the app via Bluetooth.
Solution: Go to lifespanfitness.com/support, and click to the Apps section
of FAQs. If further assistance is needed, please email coordinator@
LifeSpanFitness.com.
Problem: The desktop surface is not level.
Solution: Check to make sure the base feet are on a level surface. For a DT5,
make sure each extension tube is raised to the same height number as shown
on the extension tube. For a DT7, run calibration by pressing and holding the
height adjustment buttons simultaneously for three seconds
44
Press and hold Change Display for one second to enter Settings mode.
Press the up or down arrows to move through the various settings. Press Start
to choose a setting to change.
Press the up or down arrows to move through the various choices for that
setting.
Press Start to select a choice. This takes you back to settings mode, where you
can move through the other settings.
Press Stop to exit Settings mode.
Beep — Turns off the normal treadmill beep that happens at every keypress.
Pre Set — Turns on and off the Preset feature. Turning this off is desirable in a
group environment.
Preset Resistance — Changes the preset resistance from something other
than the default of level 1.
Weight — Changes the default bodyweight from something other than the
default of 150 pounds / 70 kilograms.
Units of measure — Choose English (Imperial) or Metric.
Multi-User — Choose yes if more than one person will be using the
bike desk.
Bluetooth-Auto — Choose whether to automatically pair. Optimized safe
operation for either single or mulitple users.
Bike Desk Personal Settings
45