Enervista Ur Setup Software; Pc Requirements; Installation - GE UR F35 Series Instruction Manual
Multiple feeder protection
system
Hide thumbs
Also See for UR F35 Series:
- Instruction manual (526 pages) ,
- Instruction manual (596 pages) ,
- Instruction manual (640 pages)
Table of Contents
Advertisement
1.3 ENERVISTA UR SETUP SOFTWARE
1.3ENERVISTA UR SETUP SOFTWARE
1
The relay front panel or the EnerVista UR Setup software can be used to communicate with the relay. The EnerVista UR
Setup software interface is the preferred method to edit settings and view actual values because the computer monitor can
display more information.
The minimum system requirements for the EnerVista UR Setup software are as follows:
•
Pentium 4 (Core Duo recommended)
•
Windows XP with Service Pack 2 (Service Pack 3 recommended), Windows 7, or Windows Server 2008 Release 2
64-bit
•
1 GB of RAM (2 GB recommended)
•
500 MB free hard drive space (1 GB recommended)
•
1024 x 768 display (1280 x 800 recommended)
•
Serial port
•
Ethernet port of the same type as one of the UR CPU ports or a LAN connection to the UR
•
Internet access or a DVD drive
The following qualified modems have been tested to be compliant with the F35 and the EnerVista UR Setup software:
•
US Robotics external 56K FaxModem 5686
•
US Robotics external Sportster 56K X2
•
PCTEL 2304WT V.92 MDC internal modem
After ensuring that the requirements for using EnerVista UR Setup are met (previous section), install the EnerVista UR
Setup software from the GE EnerVista DVD. Or download the UR EnerVista software from
http://www.gedigitalenergy.com/multilin
If you are upgrading from version 7.0 or 7.1 to 7.2 or later, some CPU modules require a new boot version. Update this first
in EnerVista under Maintenance > Update Firmware.
To install the UR EnerVista software from the DVD:
1.
Insert the GE EnerVista DVD into the DVD drive of your computer.
2.
Click the Install Now button and follow the instructions.
3.
When installation is complete, start the EnerVista Launchpad application.
4.
Click the IED Setup section of the Launch Pad window.
5.
In the EnerVista Launch Pad window, click the Add Product button and select the appropriate product, shown as fol-
lows. Select the Web option to ensure the most recent software release, or select CD if you do not have a web connec-
1-6
and install it.
Figure 1–4: ADDING UR DEVICE IN LAUNCHPAD WINDOW
F35 Multiple Feeder Protection System
1 GETTING STARTED
1.3.1 PC REQUIREMENTS
1.3.2 INSTALLATION
GE Multilin
Advertisement
Table of Contents
