Table of Contents
Advertisement
Light control
Headlight control
This function allows you to reduce current
consumption from the battery, by automatically
managing headlight switching-off.
Upon Key-On, low and high beams are Off. When the
engine is started, the low beam lights turn on
automatically. From this moment, "normal"
operation is activated: switch to high beam (i.e. high
beam and low beam light on at the same time) using
button (3) or operate the "FLASH" signal (using
button 3). If engine is not started upon key-on, it is
anyway possible to switch the lights on by pushing
the button on the LH high/low beam switch (button
3).
The low beam lights are turned on the first time it is
pressed; from this moment, the same button can be
used to switch on (and off) the high beam light (if the
engine is not started within 60 seconds, the low
beam or high beam light that was turned on will turn
off).
162
If the headlight was turned on before starting the
engine with the procedure described above, the
headlight turns off automatically when starting the
vehicle and will turn ON again when the engine has
been completely started.
3
Fig. 87
Advertisement
Table of Contents
