"PRE-LOAD" adjustment
-
the top of the round display will show the
"preload" and a bargraph indicating the set value;
-
use buttons (1) and (2) to select "NEW SET" and
press the reset button (4).
-
The number to be changed is shown on the
display;
-
buttons (1) and (2) can increase or decrease the
number (between 1 and 16);
-
press the reset button (4) to confirm the new
level.
At this point, store the new setting by pressing the
reset button (4) for 3 seconds with "MEMORY"
displayed. The upper indication and the bargraph will
be updated to confirm that the new setting was
"received" and stored.
To exit the function, select "EXIT" and press the
reset button (4).
126