Table of Contents
Advertisement
Using the supplied chain tension gauge
For a correct measure the bike must be placed on the
side stand. Always check the chain correct tensioning
in the point where it is stretched the most (repeat the
gauging on more equidistant points of the chain).
Note
Chain tension changes according to the set
Riding Mode. We recommend to carry out the
gauging with load setting at Level 1 ("URBAN" Riding
Mode and bike set on "RIDER ONLY").
Before proceeding lower the chain with your finger,
release it and fit the instrument (1).
The chain tensioning gauge (1) must be inserted
between the swingarm and the lower chain slider in
correspondence of the slider central fixing point
(Fig. 192).
268
1
Fig. 191
1
Fig. 192
Advertisement
Table of Contents
