Indicator "CONS.AVG" - Average fuel
consumption
This function indicates the "average" fuel
consumption. The calculation is made considering
the quantity of fuel used and the distance travelled
since Trip 1 was last reset. When Trip 1 is reset, the
value is reset and the first value available is displayed
10 seconds after the reset. Dashes "- -.-" are shown
on the display during the first 10 seconds when the
value is not yet available.
For the Europe, Japan and China versions the datum
is expressed in "L/100" (litres/100 Km); it is possible
to set the unit of measurement "Km/l" (kilometres/
litre) through the "Setting special" function. For the UK
version the reading is in "mpg UK" (miles per UK
gallon).
The active calculation phase occurs when the engine
is running and the vehicle is stopped (moments when
the vehicle is not moving and the engine is off are not
considered).
Fig. 44
86