Table of Contents
Advertisement
"FRONT" adjustment
The display shows 5 blocks in vertical, on the left, the
arrow on the right side of the block indicates the last
setting stored
The following options are available (reading the list
from top to bottom):
-
HARD (Hard level);
-
Hard Medium (Hard Medium level);
-
MEDIUM (Medium level);
-
Soft Medium (Soft Medium level);
-
SOFT (Soft level).
Use buttons (1) and (2) to select the block
corresponding to the new level to be set; press
button (4) for 3 seconds to confirm the new level.
After these 3 seconds the block corresponding to the
new level set will flash for 3 seconds (indicating
system is changing the setup), then it will stop
flashing and the arrow will indicate the new level set.
To exit the function, select "EXIT" and press the
reset button (4).
122
Advertisement
Table of Contents
