Table of Contents
Advertisement
Inserting the SIM CARD in your jacket/
waistcoat
To allow the pairing the D-Air
the bike with the one installed in your garment, it is
necessary to insert the SIM CARD in the specific slot
on the jacket/waistcoat.
Proceed as follows:
-
(1) detach the plug with gold plated contacts from
the PVC support.
-
(2) Find the rubber pad on the lower side of the
jacket that closes the SIM Holder.
-
(3) Remove the rubber pad.
-
(4) Insert the SIM CARD making sure that the
bevelled edge is on top left and that the USB
micro-port is on the SIM Holder's left side.
-
(5) Push the SIM CARD fully home until it "clicks"
into its Holder.
200
®
system installed on
2
3
1
4
5
Fig. 120
Advertisement
Table of Contents
