"Trip 1" meter
This function shows the distance travelled since the
trip meter was last reset.
When this function is accessed and button (1) is kept
pressed for 3 seconds, trip meter will be reset. When
the reading exceeds 999.9, distance travelled is reset
and the meter automatically starts again. If the
system measurement units are changed at any
moment, or if there is an interruption in the power
supply (Battery Off), the distance travelled is reset
and the count starts from zero (considering the newly
set unit of measurement).
Note
When this reading is reset, also "Average
Consumption", "Average Speed" and "Trip Time"
functions are reset.
For the Europe, Canada, France and Japan versions,
the default unit is km, while for the UK and USA
versions the default unit is mi.
DDA
LAP
GEAR
1
Fig. 16
51