Table of Contents
Advertisement
Entering the code:
each time button (2) is pressed, the highlighted
number increases from "0" to "9" and then goes back
to "0"; to confirm the desired number press the reset
button (4). Repeat the procedure until entering the
fourth digit. Press the reset button (4) again to
confirm.
If the code is incorrect (A), the Instrument Panel will
return to the initial indication to allow you entering the
code again.
Note
There is no limit to the number of times the
code can be re-entered; the instrument panel will turn
off automatically 120 seconds after any attempt to
enter the code.
If the entered code is correct (B), the message "PIN
OK" and the code flashing will be displayed for 4
seconds.
After 4 seconds, the instrument panel will return to
the "normal" view (with all indications active).
From this moment, the vehicle can be started using
the start button (Key-On).
Note
The vehicle can be started until a Key-Off is
performed. If the problem still persists upon the next
starting attempt, repeat the procedure from the
beginning in order to start the motorcycle
"temporarily" again.
Important
If this procedure is necessary in order to start
the motorcycle, contact an Authorised Ducati Service
Centre as soon as possible to fix the problem.
185
Advertisement
Table of Contents
