Table of Contents
Advertisement
Replacing the battery in the active key
Only use 3 Volt CR 2032 lithium ion batteries.
Note
The keys do not need to be reprogrammed after
replacing the battery.
Remove the metal part of the battery.
Use a large sized coin to pry open the shells of the
plastic grip (2 euro coin) as shown in the figure.
Important
Insert the coin only in the indicated point. Do not
other use other objects inserted in points that are
different than what is shown, as it could damage the
integrated circuit and/or the protective gasket.
Fig. 78
151
Advertisement
Table of Contents
