Table of Contents
Advertisement
Abs setting function
This Function allows customisation of the ABS
(Antilock Braking System) level as well as its
disabling.
To display the function, enter the "setting" menu
page 101 and access the "SET UP" page.
Select the "riding mode" to be changed and enter the
"ABS" function. When accessing the function, the set
ABS level "LEVEL:" will appear at the top of the
display.
To change the ABS intervention level, use buttons (1)
and (2) to select the "LEVEL:" indication and press
button (4).
The number to be set is shown on the display;
buttons (1) and (2) can increase or decrease the
number; press button (4) to confirm the new level.
If you set it to "OFF" the ABS is disabled.
At this point, store the new setting by pressing the
button (4) for 3 seconds with "MEMORY" displayed.
The upper indication "LEVEL" will be updated to
confirm that the new setting was "received" and
stored.
To exit the function, select "EXIT" and press the
button (4).
114
Warning
When the ABS status "OFF" is selected and
stored, the warning "ABS OFF" will be automatically
displayed; in this case Ducati recommends you pay
utmost attention when riding and especially while
braking.
Advertisement
Table of Contents
