Table of Contents
Advertisement
Indicator "SPEED.AVG" - Average speed
This function shows the average speed of the
motorcycle.
The calculation considers the distance and time since
Trip 1 was last reset. When Trip 1 is reset, the value
is reset and the first value available is displayed 10
seconds after the reset. Dashes "- -.-" are shown on
the display during the first 10 seconds when the value
is not yet available. The active calculation phase
occurs when the engine is running and the vehicle is
stopped (moments when the vehicle is not moving
and the engine is off are not considered). The
calculated value is displayed increased by 5% to align
it with the vehicle indicated speed.
For the Europe, Canada, France and Japan versions
the default unit is km/h, while for the UK and USA
versions the default unit is mph.
Fig. 45
87
Advertisement
Table of Contents
