Table of Contents
Advertisement
Light control
Low / High beam
At Key-On, the high beam and low beam lights are
off; only the parking lights are turned on.
When the engine is started the low beam is
automatically switched on. It is possible to switch
from low to high beam and vice versa with button (7),
positions (B) and (A), or flash with button (3). If
engine is not started after turning the key to on, it is
nevertheless possible to switch on the lights or flash.
If within 60 seconds from the manual switching on of
the low or high beam the engine is not started, the
lights are turned off.
To preserve the motorcycle battery, if when starting
the engine the high/low beams are on, the headlight
is automatically switched off and then on again
when the engine is started.
A
7
B
3
Fig 113
133
Advertisement
Table of Contents
