Table of Contents
Advertisement
Changing unit of measurement
This function allows you to change the units of
measurement of the displayed values.
In order to enter this menu it is necessary to start the
vehicle by holding down contemporaneously both the
flash button (3) and the reset button (4) for at least 3
seconds.
After entering this menu, "UNITS" is displayed; to set
the units of measurements press the reset button (4).
The instrument panel displays the values that can be
modified; use buttons (1) and (2) to select the value
to modify and press the reset button (4) again.
Note
In this MENU all other functions are disabled.
170
4
1
4
2
3
Fig. 97
Advertisement
Table of Contents
